With this 3mm aluminum plate you can make a BTA steering on your truck that gives you better steering angle with internal tire turning more than external and giving more clearance for drag link.
For installation first needed are Axial high steering uprights AX30526. Shocks must be over axle otherwise tie rod will hurt them. Tie rod must be thin, 3mm or 4mm diameter because it must run between upper link and 3rd member. Maybe you must bend your tie rod, depending on the truss you are using. If you still have 3link setup there is no room for tie rod and this kit won't work. A threated hole must be drilled on the upright arm, M2.5 or M3 it's your choice depending on harware you have. I suggest M2.5 to not weaking arm.
On 3rd pic you can see my setup